## Search found 30 matches: radius

### Garage Mini Ramp Plans

... okay. Last thing I want is to go up and get my front truck stuck on the end of the platform.

I am also unfamiliar with what a normal transition radius for this height. Should I also go up to 3ft too. Just don't know.

Any input would be greatly appreciated. I'm not looking to make something ...
on Sun Nov 08, 2015 4:22 pm

Forum: Ramp Building Forums
Topic: Garage Mini Ramp Plans
Replies: 1
Views: 4336

### Building a custom mini. Any knowledageable builders out ther

... other to make up for the lack of length in the space.

I want the QP to be at least 2' high and have around 2' of deck and somewhere around a 6' radius.

I want the wall ride to be tight (for speed)(correct me if I'm wrong) but not too hard to skate.

I think, if I do this right, I can still ...
on Tue Apr 21, 2015 12:27 pm

Forum: Ramp Building Forums
Topic: Building a custom mini. Any knowledageable builders out ther
Replies: 1
Views: 4988

### Re: Building 3' indoor

... both sides, check out the ramp calculator at http://www.xtremeskater.com/ramp-plans/ramp-tool/, if you use the defaults ( 6' 10" transition radius, 8' flat bottom ) then input ramp-height = 41.5" ( 3' transition-height + 5.5" flatbottom ) and platform-length = 36", the ramp ...
on Tue May 20, 2014 10:53 pm

Forum: Ramp Building Forums
Topic: Building 3' indoor
Replies: 2
Views: 5100

### Re: skeleton of half-pipe?

You can, but may need a few more closer together in the radius of your ramp. That's also recommend when using 2x6. That's where all the weight and down force hits the hardest and will get bouncy and lose speed if you do not have enough ribbing closer together.
on Fri May 17, 2013 12:01 pm

Forum: Ramp Building Forums
Topic: skeleton of half-pipe?
Replies: 1
Views: 6458

### Re: transition drawing

... was we laid both 3/4 plywood next to each other and then measured up from our starting point to wear we will drill the screw for the transition radius in the 2x4. (Drill right through the 2x4 into the 3/8's plywood) Use the 2x4 as a straight edge swing, place the pencil at the starting point ...
on Sat Aug 11, 2012 6:57 pm

Forum: Ramp Building Forums
Topic: transition drawing
Replies: 1
Views: 5167

### Re: What is best bmx ramp hight for basic tricks

... each of these ramps and how do I best set up the down ramps? Should they be just flat trans like in a skate park or like FMX or should I put some radius into them?
would it also help if when I do the tar lining bit, could I put in some 1/4" rubber instead for a softening of impact effect?

Also ...
on Tue Oct 12, 2010 8:27 pm

Forum: Ramp Building Forums
Topic: What is best bmx ramp hight for basic tricks
Replies: 3
Views: 4074

When people say "transition", as in "7 foot transition", do they mean the radius of the curved part of the ramp, or the X axis of the curved part of the ramp? I'm so confused!!
on Thu Sep 09, 2010 3:49 pm

Forum: Ramp Building Forums
Replies: 1
Views: 6191

### Re: Skatepark

If its too steep take it apart, taket the height multiply x 1.5 and use that for the radius.
on Wed Feb 03, 2010 1:48 pm

Forum: Ramp Building Forums
Topic: Skatepark
Replies: 5
Views: 3384

### Re: BMX

For a good BMX ramp you can't go wrong with 6 feet tall, 8 feet radius. An 8 foot radius is just about right.
on Mon Nov 16, 2009 9:19 pm

Forum: Ramp Building Forums
Topic: BMX
Replies: 2
Views: 2014

Wow that seems a bit crammed. Well in my opinion I would go with a 72" radius.
on Mon Nov 16, 2009 9:16 pm

Forum: Ramp Building Forums