Xtreme Skater - Free skate ramp plans
Sign Up   Login

transition drawing

Talk about ramp building, ask questions

transition drawing

Postby halfpipeharvy on Wed Dec 30, 2009 3:36 pm

hey whenever i try to draw my transitions even when i use the pencil and wood trick i still get the lines wobberly its kinda geting enoying :!: :twisted:
Posts: 1
Joined: Wed Dec 30, 2009 3:28 pm

Re: transition drawing

Postby xblazenx on Sat Aug 11, 2012 6:57 pm

Me and my brother had the same problem and the trick we did was we laid both 3/4 plywood next to each other and then measured up from our starting point to wear we will drill the screw for the transition radius in the 2x4. (Drill right through the 2x4 into the 3/8's plywood) Use the 2x4 as a straight edge swing, place the pencil at the starting point and right up against the 2x4 and hold the 2x4 and pencil and swing across the whole 4x8 plywood.
Posts: 1
Joined: Mon Jul 30, 2012 2:15 pm

Return to Ramp Building Forums

Who is online

Users browsing this forum: No registered users and 3 guests

© 2014 Xtreme Skater