grind box

[darkstar645]

are these good to learn boardslides on?

[Bobby]

Not really, when you are first learning to board slide it would probably be easier to use a simple rail, so that you can have your board parallel to the ground as you slide. I will probably add plans for this eventually, you can find them in stores and at skate parks as well.

However it is still possible to board slide the box, it is just harder.

[darkstar645]

ok cool, thanks, im going to build one but i just wanted to know if i needed to build an extra rail for boardslides too, which i think i will do

[Bobby]

Cool, make sure to take some pics when building it, I am almost done with a Project Pages section of the website for users to submit pictures/notes.

[darkstar645]

ok well ill get some pictures and post em then

[chris9999]

Not really, when you are first learning to board slide it would probably be easier to use a simple rail, so that you can have your board parallel to the ground as you slide. I will probably add plans for this eventually, you can find them in stores and at skate parks as well.

However it is still possible to board slide the box, it is just harder.

to make a simple rail just take 1 2x6 and 2 2x4 and screw them together with the 2x6 im the middie then put 2 peices of copeing on top of the 2x4 and screw then like you would do for putting the copeing on a ramp

[dss454]

the best way for me was a little flat bar.