..

3 quarter inch plywood 2 by 4s you need at least 4 to 5 1 pound boxes.trust me you will use a lot more skrews than you think. you need 45 2 by 4s.if you buy 46 your deck will be twice as big make a square mark 2 2 by 4s 1 ft apart for frame half way done drill holes,it will make it a hole lot easyer 2 skrews per piece on each side just finishing last skrew 1st side piece 2nd side piece skrap piece.dont throw it away figure out a way to sk8 it i dug a hole but now i recomend buying dirt because its back breaking work filling it in later.its inexpensive and worth it. just level the dirt high enogh to were it gets over anything in the ground that you cant move like the tree root on the middle left of the picture 1 piece is done get all other pieces ready to skrew down i went to home depot its a hole lot cheaper:instead of payin $2.75 for a 2 by 4 u pay $1.50 somthin soakin it makes it able to bend wit out breakin it. myn almost broke.

{"i":-1,"b":"../" }

© 2010 Xtreme Skater