NON Structural CD [5]plywood DIMENSIONS: 12mm x 1220mm x 1198mm

Marked out my ramp using the String and Compass method [http://www.xtremeskater.com/ramp-plans/transitions/string-and-compass.php]

A little help from my little friend! lol =)

I used a Jigsaw to cut the 12 degree transitions, but you can use a handsaw or something to cut it

12 degree Tranny

Marking out the Trannies

This is the ramp 80% done =D YAY!! Tommoro im going to paint some logos on it then varnish it and hopefully put some coping on.

On this one you can sortof see into the back of it.. you can see the placement of all the main structual beams.

I've already got some second hand pine [AUD-$1.50]and some 5ply [1200mm x 1800mm][AUD-$17.50] ill post more soon :)

UPDATE
10/01/2010:
Sketch out and cut the trannies to the 12 degree angle with a jigsaw or handsaw/skillsaw.

January 2010

A true australian backyard