Free Vert Halfpipe Plans

8 Foot Vert Halfpipe

Height	8'0"
Width	16'
Length	35'

These are plans to make an 8 foot high and 16 foot wide halfpipe (the same that I have built in my barn). These plans can be adjusted. Before you start you need to make sure that you have plenty of room to build it. It is possible to build outside (on a hard ground), but you need to make sure you have a good way to protect it from rain. The total cost of this halfpipe is about $1100 in wood, then the cost of screws and hardware.

Wood and Screws

172 pieces of 8' 2X4.
24 pieces of 8' 2X6.
24 pieces of (3/4) inch plywood.
32 pieces of (3/8) inch plywood.
16 pieces of (1/8) inch massonite.
A lot of 2.5" drywall screws
4 pieces of 8' long 2.5" diamater metal coping

Tools required

Drill (bits to match screws)
Power Saw
Tape measure
leveler
90 degree angle edge
pencil
chalk (string to make straight lines)

The Free 8' Half Pipe Plans

1+2. Build the quarterpipe skeletons
3. Build 4 platforms
4. Build 4 Supporters
5. Build 4 back walls
6. The Flat Bottom
7. Coping
8. Put it together
9. Plywood